主營:
節能空壓機 ETC無油轉換器 羅德康普EVO/EVO-NK系列主機 羅德康普NK/B系列主機 后處理及空壓機耗材 免費技術指導選型
帶齒輪的螺桿主機,工作壓力范圍從5公斤到15公斤,高效率低噪音,增加了軸承尺寸和無磨損滾動輪廓,壽命周期長,EVO6-G主機,EVO9-G主機,EVO15-G主機,EVO28-G主機,EVO42-G主機,EVO76-G主機,EVO105-G主機
?Type型號 | Recommended motor推薦電機 | Max. flow rate在7公斤時最大排氣量 | ||
power min. – max.最小-最大功率 | at 7 barg / 100 psig | |||
kW | hp | m3/min | cfm | |
EVO3-G | 5.5 - 18.5 | 10-25 | 2.8 | 100 |
EVO6-G | 15 - 37 | 20 - 50 | 5.5 | 200 |
EVO9-G | 22 - 55 | 30 - 75 | 8.4 | 300 |
EVO15-G | 45 - 90 | 60 - 125 | 14.4 | 510 |
EVO28-G | 75 - 160 | 100 - 200 | 26 | 920 |
EVO42-G | 132 - 250 | 175 - 340 | 42 | 1.485 |
EVO76-G | 160 - 540 | 214 - 725 | 76 | 2.678 |
EVO105-G | 250 - 670 | 335 - 900 | 105 | 3.7 |
EVO28-G帶齒輪驅動的螺桿空壓機主機
功率范圍高達160 kW/200 HP
容量高達26 m3/min/920 cfm
壓力高達15 barg/220 psig
重量約為323 kg/712 lbs
我們的噴油螺桿空氣端EVO28-G是您壓縮機系統的心臟。與我們廣泛的組件一起使用,您可以以最高的質量標準建造具有最高效率、低噪音的完美壓縮機組件。
EVO28-G Air End with Gear
Screw Air Ends with Gear Drive: EVO28-G
Power range up to 160 kW / 200 HP
Capacity up to 26 m3/min / 920 cfm
Pressure up to 15 barg / 220 psig
Weight approx. 323 kg / 712 lbs
Our oil-injected screw air end EVO28-G create the heart of your compressor system. Used with our wide range of components, you can build the perfect compressor package with ultimate efficiency, low noise, at the highest quality standards.
All information at a glance!
Advantages of our new EVO? technology
New ROLLING PROFILE? – ultimate efficiency with reduced noise
Long life cycle due to increased bearing dimensions and wear-free ROLLING PROFILE?
Wide operating pressure range from 5 to 15 barg
High manufacturer assembling – "Made in Germany"
Quality assurance – bench test of every air end before leaving our factory
Easy application selection with our new ROTORCOMP? SIZING AIR Software
Highest flexibility for your package design
Suitable for all types of motors
Drive options: Belt drive, direct drive, internal gear drive
Base and face-flange mounting