主營：

節能空壓機 ETC無油轉換器 羅德康普EVO/EVO-NK系列主機 羅德康普NK/B系列主機 后處理及空壓機耗材 免費技術指導選型

您剛好需要?

我剛好專業

......

羅德康普 >> NK200-G帶齒輪傳動的螺桿式空氣壓縮主機

NK200-G帶齒輪傳動的螺桿式空氣壓縮主機

緊湊型主機EVO3-NK-G,EVO6-NK-G,EVO9-NK-G,NK200-G，德國rotorcomp，羅德康普主機，羅德康普動力，rotorcomp，rotorcomppower,

市場價：￥ 0.00

價格：￥ 0.00

數量：

立即購買

加入購物車

緊湊型主機EVO3-NK-G,EVO6-NK-G,EVO9-NK-G,NK200-G，德國rotorcomp，羅德康普主機，羅德康普動力，rotorcomp，rotorcomppower,

型號	建議電機功率 kw	7公斤時最大排氣量 m3/min	壓力范圍 barg	凈重 kg
Type	Recommended motor power min.- max.	Max. flow rate at 7 bar	Pressure range min. - max.	Net Weight
EVO3-NK-G	7.5 – 18.5	2.8	5 – 15	69
EVO6-NK-G	15 – 37	5.5	5 – 15	135
EVO9-NK-G	22 – 55	8.4	5 – 15	229
NK200-G	45 – 75	11.5	5 – 15	304

NK200-G Screw Air Compact Unit with Gear Drive

NK200-G帶齒輪傳動的螺桿式空氣壓縮主機

Power range up to 75 kW / 100 HP

功率范圍高達75 kW / 100 HP

Capacity up to 11.5 m3/min / 408 cfm

排氣量高達11.5 m3/min / 408 cfm

Pressure up to 15 barg / 220 psig

壓力高達15 barg / 220 psig

Weight approx. 305 kg / 673 lbs

Our unique series of NK compact units are oil-injected screw compressor modules that integrate the main parts of a compressor system. This solution is the best possible way to build a reliable, compact and cost efficient complete compressor package with ultimate efficiency, low noise and the highest quality standards.

Our EVO-NK-G compact unit is an oil-injected screw compressor module that integrate the main parts of a compressor system and provide optimum operation reliability and reduced design costs for your compressor package.

The following components are integrated into each compact unit: EVO? oil-injected air end with ROLLING PROFILE?, intake valve with control unit and air filter, oil reservoir and oil separation system with coalescing cartridge(s), oil filter and oil thermostat valve, minimum pressure valve and non return valve.

Various options are also available, such as safety valve, oil level sight glass and maintenance indicators.

Advantages of our new EVO? technology

New ROLLING PROFILE? – ultimate efficiency with reduced noise

Long life cycle due to increased bearing dimensions and wear-free ROLLING PROFILE?

Wide operating pressure range from 5 to 15 barg

High manufacturer assembling – "Made in Germany"

Quality assurance – bench test of every air end before leaving our factory

Easy application selection with our new ROTORCOMP? SIZING AIR Software

Highest flexibility for your package design

Suitable for all types of motors

Drive options: Belt drive, direct drive, internal gear drive

Base and face-flange mounting